Business Division


Steel Raw Materials

Industrial Machines & Diy Tools


Marine Accessories

Natural Stones


Flat steel Products

  • Hot Rolled Coils / Sheets / Plates
  • Cold Rolled Coils / Sheets (Bright and Black Annealed)
  • Coated Steel Coils / Sheets / Corrugated Sheets / Profile Sheet

Long Steel Products

  • Steel Pipes
  • Reinforcing or Deformed Bars (Merchant Bars)
  • Wire Rods
  • Steel Billets

Other Products

  • Roofing Nails
  • Wires Barbed and Plain

Flat steel Products

1. Hot Rolled Coils / Sheets / Plates

Hot-rolled coil is produced from semi-finished products, which are reduced to certain thicknesses by rolling and annealing and wound into a roll. Hot-rolled steel is used in e.g. for the manufacture of pipes, steel doors and tanks or is further processed into cold-rolled steel.


Hot Rolled (Coils, Sheets, Plates, Floor Plates)
Q235, A36, A572, A729, S355JR, S460N, S460M, SAE1006, SAE 1008 B or Cr.
2mm and up to 25mm
5mm up to 300mm
2mm and up to 25mm
900mm up to 1500mm
1500mm up to 3000mm
1000mm up to 1500mm
Coils and Cut Sheets
Cut Sheets and Coils
2. Cold Rolled Coils / Sheets (Bright and Black Annealed)

Cold-rolled steel refers to low-carbon steel produced by a “cold rolling” method and processed at near normal room temperatures. Cold-rolled steel offers superior strength and machinability. Cold-rolled steel sheets are commonly used for engineered products where tight tolerances, concentricity, straightness and coated surfaces are required.


Cold Rolled (Coils & Sheets) (Close Annealed, Full Hard, Black Annealed)
JIS G3141 & also in equivalent American Standards SPCC SD, DD, 1B etc
0.30mm and up to 2mm
0.11mm upto 0.30mm
900mm up to 1500mm
750mm up to 1250mm
Coils and Cut Sheets
3. Coated Steel Coils / Sheets / Corrugated Sheets / Profile Sheet

Coated Steel is basically the product of continuous and highly automated industrial process for efficiently coating coils of metal with alloys like zinc, Aluzinc and polyester based paint. We deal in the following coated steel products;



Coated Steel
– Galvanized
– Galvalume
– Pre-Painted
– GI

CQ, A653, A792, GR50, GR40, G300, G550, (Z40~275
Paint: 12mic to 25mic)
0.125mm and up to 2mm
750mm up to 1250mm
Coils / Sheets/
Corrugated Sheets/
Profiled Sheets
i. Hot-Dipped Galvanized Coils:

It is produced by a process called galvanization where the iron and steel is coated with zinc, which alloys with the surface of the base metal when immersing the metal in a bath of molten zinc at a temperature of around 840 °F (449 °C).

ii. Hot-Dipped Galvalume Coils:

Galvalume is a product of continuous and highly automated process for efficiently coating the coil surface with an alloy which is a combination of Aluminium (55%) and Zinc (43.5%) and a little amount of Silicon and other elements.

iii. Pre-painted galvanized or galvalume coils:

Pre-painted galvanized or galvalume coils, also known as pre-coated steel coil, coated steel, color coated steel etc., typically with a hot dip zinc and or hot dip aluzinc coated steel substrate. The term is an extension of GI or GL which is a traditional abbreviation for Galvanized Iron and Galvalume respectively.

Long steel Products

1. Steel Pipes

Steel Pipes are long, hollow tubes that are used for a variety of purposes. They are produced by two distinct methods which result in either a welded or seamless pipe. We offer a range of pipe products in different shapes (round, Square and rectangle) such as ERW Pipes, LSAW Pipes, Seamless pipes, SSAW Pipes and pipes used for Scaffolding.

2. Reinforcing or Deformed Bars (Merchant Bars)

Merchant Bars are the collective common name for all the construction related bars like, Equal Angle, Unequal Angle, Channel, Beams etc.

3. Wire Rods

Wire Rods are semi-finished product made out of billets by drawing process under hot rolling temperature. They are majorly used in fastner industries, roofing nail manufacturing and wire drawing.

4. Steel Billets

Steel Billets are also known square bars are a semi-finished raw material which is used in manufacturing rebar, wire rod and also seamless pipes. (from round billets)

As a company we strongly believe in long term sustainable business and we are more focused on identifying a business partner and add value to your business and growth which would help us also to grow.

For any clarification please feel to call us or email us at below given contact details.

Steel raw material

1. HMS 1-100%

Heavy Melting Scrap with a minimum thickness of 6 mm. It is classified as ISRI 200-202 (Institute of Scrap Recycling Industries, Inc.)

2. HMS 1& 2 (80:20%)

HMS 1& 2 is also heavy scrap steel but the thickness of this type of scrap range from 4mm and up where HMS 2 thickness is 4mm and 5mm max, This is mixed with HMS 1 scrap in the ratio of 80% : 20% , HMS 1 and HMS 2 respectively with the classification ISRI 200 to 206.


This scrap is obtained mainly from oil and water tanks, the vessel plates and broken barges and also construction steel like Beams/ Channels/ Angles etc. It is Classified as PNS Scrap as per ISRI 231-232 with thickness must be 8mm upwards. This scrap is used for melting and for re-rolling.

4. Shredded Scrap

It comes from the shredding of automobile scrap and other industrial scrap. It is a scrap of great value. This is classified as ISRI 210-211. The ideal average weight is 68- 75lbs per cubic feet

5. Stainless Steel Scrap
The use of stainless-steel scrap in the production of stainless steel remains as important as ever. This secondary raw material is, indispensable if the increasing demand for the necessary nickel units brought about by the constantly growing stainless steel production is to be met.

Industrial Machines and DIY Tools

If you are planning to expand your business activities and look forward to any support regarding machines related to roofing and construction industries, then we would be happy to discuss with you about the same. Our specialisation is in Barrel Corrugator machines, Roll Forming Machines (all kind of profiles), Purlin and Truss manufacturing machines etc. Primarily we export these machines from Taiwan, Vietnam and China.

Timber / Logs

We also export Logs and Timbers mainly from African continent. Few of our regular exported wood is listed below

1. Padauk
African Padauk is a very strong, stable hardwood. It is known for its typically robust reddish-brown coloration (which darkens with age), although colors can range from a bright orange to a slightly muted burgundy often with highlights, grain lines and/or secondary colors ranging from brick red to a more purplish muted hue. The wood can sometimes be found figured (ribbon; striped; etc.), and it is well known for its deep chatoyance and wonderful natural luster. Grains are typically straight, though sometimes interlocked. The wood is considered very durable and also resistant to bug / insect / termite attack, which accordingly has seen it used in outdoor applications for centuries in its native Africa. Its working and finishing characteristics are decidedly favorable.
2. Teak
We procure the Teak Wood mainly from Ghana. Ghana Teak Wood is known for its durability and reliability. Main attributes of this kind of Teak is that it has good resistance to decay & termites.

We offer our clients a class range of genuine Ghana Teak Wood widely used in the marine applications, furniture and constructions.


We also deal in Marine equipment and accessories supplies to few shipbuilding yards and oil and gas industries based out of Asian continent.

Natural Stones

Natural Stone refers to several products quarried from the earth, used over many thousands of years as building materials and decorative enhancements. These products include Granite, Marble, Limestone, Travertine, Slate, Quartzite, Sandstone, Adoquin, Onyx, and others. We at VISE deal with one of the best-known natural stone in the world, Granite

We supply granite stones in following forms;
Surface Tops
Slabs & Tiles
Our speciality is in engineered surface tops and monuments made suitably for the requirements in European markets. Our supply source has been selected after due diligence with years of association and our own excellent and dedicated team to handle the supply chain right from the factory to the destination ports gives us the competitive edge.
We are representing our supply source in European markets and keen in extending to other markets and interested representative can contact us.
1.Surface Tops
2. Slabs & Tiles
3. Monuments

+65 8725 6960